To choose the correct size backer rod to use, measure the gap you want to fill with a ruler or tape measure to determine the width and depth of the gap. We have fast curing single pack epoxy options which cure in 15-20 minutes to ensure very little downtime in your business. Whether you need an internal non-slip paint for a commercial kitchen or external non-slip paint paint for a playground, Polycote can provide the solution. Due to covid and new contactless deliveries, our carriers will not require a signature but will take down the recipients name as POD.

Yes, backer rods can be painted over, just make sure the backer rod is clean, dry, and covered in the sealant before painting. If the surface is particularly soft, porous or unstable, it is important that you use a primer with excellent penetrating and binding properties.Compatible with all know types of sealants to control the depth of the sealant in proper relation to joint width. Suitable for horizontal and vertical joints, sealing of internal wall joints, draft proofing and sealing windows. Solutions include damp proofing paint and professional epoxy paint, tough and flexible polyurethane floor paint in a range of colours and finishes and clear anti slip coating for floor tiles.

A quantity of x3 would be 18 metres and so on upto a maximum of 550 linear metres (a quantity of x92).Closed cell polyurethane backer rod for use as a backer in expansion joint sealing to avoid three sided adhesion. The foam backer rod is sold in 6 metre quantity increments and are shipped as a single, continuous length. The sound resistance classification of the FR Foam is 58dB at a depth of 10 cm, which may solve some construction industry problems. These products can help to ensure that the joint is properly sealed and protected from moisture, air, and other elements that can cause damage over time.

Backer-rod is an extruded closed cell expanded polyethylene cord which is CFC and HCFC free and does not absorb moisture. Top tip - if you have a newish house or extension, then frequently the plasterboard has been dot and dabbed against the brickwork but not sealed effectively. Products arrived in good time and perfect for the job, a fungicidal wash to help keep moss off the roof. illbruck FM330 is a one part, rapid, moisture-curing expanding polyurethane foam which is gun applied and has excellent elasticity, airtightness and acoustic properties.When applying the sealant, it is important to use the right tools and materials, such as a silicone gun or a sealing tool, to ensure that the sealant is distributed evenly and adheres properly to the surfaces of the joint. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. They also appreciate that the sealants come in various diameters and are easy to use and cut to size using scissors. Spent a lot of time looking for the right colour of sealant with no real results until I stumbled across Sealant Supplies. As experts in closed cell pe foam, we also produce a wide range of foam extruded profiles for use as protection and packaging in many industries.

Select a backer-rod diameter that is approximately 15 to 25% larger than the width of the joint to give a firm base. The rod should be inserted into the joint, pushing it down until it reaches the bottom of the joint. Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Chemical resistant and with superb adhesion, this twin pack polyurethane is an extremely strong pourable joint sealant, resistant to heavy. Floor Screeds Polycote’s large range of concrete repair mortars and screeds offers a product to fill every application and budget for both domestic and industrial use.Backer Rod is an integral component of sealant joints, it provides three main functions that allow the sealant joint to perform. Heat Mate Sealant is a high modulus permanently flexible 100% high-temperature silicone that is temperature resistant up to 300°C.