HD Component AV Cable For Sony Playstation PS2 PS3

Product Information

Play Sonic in style: Sega bringing the Saturn controller to PS2". Joystiq. 26 February 2005 . Retrieved 15 September 2010.

HD modes (480p and 540p) are switched constantly to 480i or 576i whenever something non essential is on screen (menus, movies, etc.). HD modes need to be enabled every time the game is started at the in-game option menu as the setting is not stored in the game save although the screen ratio option is saved.Some 480p capable RGB monitors can accept a RGsB signal, simply by toggling the external sync button off when RGsB is enabled. Many (if not all) Sony monitors that support 480p have this option. The RFU Adapter (SCPH-1122) is an RF Modulator and cable that carries mono audio and video at 576i/50Hz (PAL) or 480i/60Hz (NTSC) via an RF signal and connects using a TV aerial plug. [10] It is similar to the RFU adapter cable available for the PlayStation. When progressive mode is enabled on PAL (288p/576i) games, the resolution is 480p, not 576p. Note that not all games from PAL territories support progressive scan mode 480p even if their NTSC U/C counterparts do. Buzz! Buzzers - PlayStation 2, PS2 official peripheral". Uk.playstation.com. 2009-07-21 . Retrieved 2012-03-27.

No image will be displayed with component cables unless a 240p/288p-compatible monitor or other workarounds are used.

PlayStation 2

GBS-Control– The GBSc can accept all the PS2’s resolutions over the component video input and also supports motion adaptive deinterlacing. It’s a DIY solution, but excellent for PS2 users on a budget. The DVD Remote Control is an infrared remote control for the PlayStation 2 designed to allow easier control of DVD movies. The first remote came bundled with an infrared receiver dongle (SCPH-10160) which attached to one of the PS2's controller ports; this dongle is not needed on later PS2 models (beginning from SCPH-500xx) and slimline PS2 models (SCPH-700xx to SCPH-900xx) as they featured an integrated IR port. HDMI Cables: At the moment, no plug-and-play HDMI cable supports all resolutions from the PS2. In almost all cases, if you’re gaming on a flat-panel, it’s best to just use a component video cable and scaler (links below). On the ps2's menu the component cable makes it look clearer than it dose on the av cable but for some reason on some games the component cable makes lettering look worse. Its not always lettering either sometimes the actual game looks worse with this component cable.